Research-based buying advice · Reviewed October 20, 2026
DeWalt DCS570 review: the buying verdict
The DCS570 is worth considering when you already own suitable DeWalt 20V MAX batteries and need a conventional cordless circular saw for general woodworking. Compare the exact package against current alternatives before ordering. An older model name or a sale badge does not establish better value.
This research-based review assesses the DCS570 family using official US kit information and the manufacturer’s manual. Pelstro has not physically tested the saw, measured cutting speed or runtime, or conducted a long-term reliability study.
30-second decision guide
- Consider it: existing compatible DeWalt battery owners who need a general-purpose circular saw.
- Compare a kit: new cordless users who need the complete power setup.
- Consider a track system: repeated cabinet-panel cuts where rail alignment and extraction matter.
- Consider a jigsaw: curved plywood shapes rather than long straight cuts.
Our plywood saw buying guide explains the tool-type decision before you commit to a specific model.
What DeWalt’s documentation confirms
The official DCS570P1 page identifies a brushless 20V MAX XR circular-saw kit using a 7-1/4-inch blade. It lists a maximum cut depth of 2-9/16 inches and bevel capacity up to 57 degrees. The kit includes power equipment; the DCS570B bare-tool reference should be checked separately for its exact contents.
These specifications describe capability under the manufacturer’s conditions. They do not prove that the saw will maintain a particular cutting speed in every material, and they do not establish how many cuts your battery will deliver.
Where it fits in a DIY tool collection
A conventional circular saw is useful for straight cuts in appropriate timber and sheet material with a suitable blade. That makes the DCS570 category relevant to shelves, workshop projects and general renovation work. It is not the tool to choose for tight curves or precision joinery simply because it can cut plywood.
The cordless format is convenient when power outlets are awkward. The tradeoff is that required batteries and charging become part of the setup. A well-priced corded saw remains worth comparing if you mainly work at one bench.
Battery choice and complete cost
Confirm approved battery combinations and choose a pack suited to the workload. A compact pack changes handling differently from a larger pack. Amp-hours alone do not predict actual runtime: blade, material, feed and battery condition all matter.
If your present battery collection consists of small or worn packs, do not treat the bare-tool price as the entire purchase cost. Use our cordless battery guide to separate energy labels from compatibility.
DCS570B or DCS570P1?
Compare the seller’s full model reference and contents. DeWalt’s official DCS570P1 listing is a kit with a battery and charger, while a tool-only listing needs those components separately. Do not infer an exact included battery capacity from the family name alone.
A useful total includes the saw or kit, any required approved power equipment, a blade suitable for your work, delivery and tax not already included. Our bare-tool versus kit guide provides the cost comparison.
Guide compatibility: a rip fence is not a track system
DeWalt’s support documentation lists the DW3278 rip guide as compatible with the DCS570. That is a specific accessory reference, not a promise that the saw fits every rail on the market.
For a straightedge setup, establish the correct shoe-to-blade offset with the saw disconnected from power. Confirm the guide and clamps do not obstruct the motor, base or guard over the full intended cut. Follow the manual for setup and operation.
When a plunge saw is the better purchase
If you repeatedly break down sheets for cabinets and want a dedicated rail-guided workflow, compare a matched plunge-saw system. Include the rail length, clamps or connectors needed, blade and extraction accessories in the budget.
The track saw vs circular saw comparison explains why the extra investment may fit repeated sheet work but be unnecessary for varied occasional DIY.
Blade and setup matter more than a headline rating
A general construction blade and a finish-oriented plywood blade serve different priorities. Match diameter, arbor, speed rating and blade type to the saw and material. Do not improvise an incompatible blade fit to obtain a higher tooth count.
Keep support stable and prevent the material from closing on the blade. Do not force a cut or defeat the lower guard. Read our circular-saw setup guide and blade-changing guide alongside the current manufacturer instructions.
Check the DCS570B tool-only offer
Check DCS570B on Amazon US. Battery and charger are excluded. Compare the exact package, current alternatives, seller and delivered cost.
As an Amazon Associate I earn from qualifying purchases. Pelstro may earn a commission through this link at no extra cost to you. Prices and availability vary.
What to compare before buying an older offer
- The exact saw and type designation, not only “20V circular saw.”
- Current alternatives available in your region.
- Complete setup cost and whether you already own suitable batteries.
- Seller, returns, applicable warranty and package contents.
- Condition, guard operation and included accessories if considering a used saw.
We have not established that a particular DCS570 offer is the cheapest, newest or best-performing current choice. Use the main circular-saw guide to compare the wider category.
Frequently asked questions
Does the DCS570B include a battery?
A bare-tool offer does not include the battery and charger needed for operation. Confirm the exact seller package; the P1 kit has a different contents list.
Can it cut plywood?
It can be considered for straight plywood cuts with an appropriate compatible blade and supported setup. It is not a substitute for a jigsaw when you need curves.
Does a rip guide make it a plunge track saw?
No. A rip fence and a matched plunge-saw rail system guide the tool differently. Check compatibility and the intended cutting method.
Final recommendation
Shortlist the DCS570 when existing DeWalt equipment and the complete offer make sense for general straight cutting. Compare a track saw for repeated sheet work, and compare a corded alternative if stationary workshop use dominates.